ATI & Counter-Strike Ultimate Driver

[Release Notes]
* Based on Modified Catalyst 3.8
* Based on the "Special" CS OpenGL Driver
* Optimized and Tweaked ONLY! for Counter-Strike
* Includes "Gamma" Fix!
* Includes "Random Frame drop noticed in CS" Fix!
* Includes "high recoil noticed in CS" Fix!
* Includes "Catalyst Driver's PCI Write cause input delay" Fix!
* Best performance and quality in Counter-Strike
* Highest and Stable frame rates in Counter-Strike

[Important Notes]
* Use 32bit in Counter-Strike (16bit will result in texture corruption on few cards)
(add -32bpp in Steam -> Counter-Strike -> Properties -> Launch Options)
* X800/Mobolity/FireGL cards is NOT SUPPORTED!
* No Softmods included
* Use this driver at your own risk.
* Direct3D perform "Average" in this driver.
* for full Counter-Strike performance consider using "REGENERATION's HighFPS Config V3" from the Files Section
or another tweaked CS config
* This is not NGO Driver! this driver has been "designed" to gain the maximum performance.
and to fix known issues in Counter-Strike.
and its recommended ONLY for Professional/Dedicated Counter-Strike Players
if your not Dedicated/Professional CS Player then use the latest Omega Drivers

[Download]

ATI Catalyst 4.8

Resolved CATALYST™ Driver Issues:
-3D Mark03: Display corruption is no longer noticed when running the Trolls Lair test 3 under Windows XP
-Beyond Divinity:Playing the game with FSAA set to 2x no longer results in display corruption when scrolling the display by moving the mouse to the left of the display
-High Heat Baseball 2003: The display no longer loses sync when exiting or changing player characters in the game High Heat Baseball 2003 under Windows XP with an ATI RADEON X800 series installed
-Madden NFL 2003: The game no longer fails to respond under Windows XP when an ATI RADEON 9800 XT is installed and attempting to set the Truform slider to Application Preference
-Need for Speed Underground:Playing the game under Windows XP with an ATI RADEON 9000/9200 installed no longer results in the road ahead not being lit up by the car's headlights
-Splinter Cell Pandora Tomorrow:Display corruption is no longer noticed when launching a multiplayer game under Windows XP with an ATI RADEON™ 9200 installed
-Thief 3:Inconsistent lighting and shadow flicker is no longer noticed when playing the game under Windows XP
-Unreal Tournament 2004: Playing the game under Windows XP with an ATI RADEON X600 series installed no longer results in game corruption being displayed when setting Anti-Aliasing to 4x and having the display properties set to 1600x1200 32bpp

Resolved Game Issues:
-City of Heroes: Specular lighting issues and incorrect textures is noticed when playing the game under Windows XP. Further information on this issue can be found at: www.ati.com/support/infobase/4561.html
-F1 Challenge: A performance decrease is noticed under Windows XP with an ATI RADEON™ X800 PRO installed. Further information on this issue can be found at: http://www.ati.com/support/infobase/4578.html
-Indian Jones and the Emperors Tomb: Display corruption and missing polygons are noticed in the game. Further information on this issue can be found at: http://www.ati.com/support/infobase/4563.html
-PainKiller: missing textures is noticed on the ground and light artifacts are noticed when moving around within the game or when moving in and out of the light. This issue is known to occur under Windows XP when an ATI RADEON X800 XT is installed. Further information on this issue can be found at: http://www.ati.com/support/infobase/4579.html
-Attempting to play a Java based game or visit a Java based website results in display corruption under Windows XP when either an ATI RADEON 9800 SE or RADEON™ X800 XT Platinum card installed and AA is enabled. Further information on this issue can be found at: http://www.ati.com/support/infobase/4570.html

Download:
Windows 2000/XP

Spirit Driver v1.5

- Catalyst 4.8 based
- Best quality in 2D,3D
- D3D/OGL Optimizations (Far Cry , DOOM3,BF Vietman,BF 1942,Sacred,Lock -On,IL2,Splinter cell 1 et 2,UT2004,Rainbow Six 3,etc..)
- Bug fix Radeon 9600
- 9800XT softmod is back
- DIVX/DVD/SVCD... optimizations
- X800 Softmod has been turn off
- Bugs Fixed (Halo,Deus EX 2)

Download:

ATI Radeon DNA-drivers 2.8.4.8a

*** The OC-Protection for 9000/9200/9550/9600 isn't removed ***
*** No one took the time to finish it intime, the OC-protection ***
*** will only be unlocked when using the softMOD install ***
* Based on the Official CATALYST 4.8 release
- with the CATALYST 4.9 BETA OpenGL file
* Added the DNA-drivers-Changer This will allow you to change the:
-:Icons
-:OpenGL file
- whithout having to reinstall the whole driver
* Fixed install problems ("video driver could not be found")
- all ATI RADEON cards should install now.
* Added the DNA-drivers special Insane FPS Installation (beta)
* Added a new Call Of Duty installation
* Added a new RTCW ET installation
* Deleted the CounterStrike_16BIT and 32Bit install options
- the Normal, HighFPS,UltraFPS and Insane_FPS options should do the job
* Added New DNA-drivers themes to the installation
- all icons in the CP and start-menu get the theme chosen
-:Call Of Duty
-:RTCW ET
* Removed an DNA-drivers theme from the installation
-:Pink

Download:

Radeon Omega Drivers v2.5.67

Zmiany:
* Based on the official Catalyst 4.8 drivers.
* Added support for some new Radeon cards.
* Fixed a few laptop bugs (but still unsure about the video playback problem).
* Optimized the current OGL driver for D3, it should improve performance with no loss in quality.
* Optimized FSAA performance for both D3D and OGL.
* Updated Radlinker to version 1.013
* Updated ATITool to version 0.0.21
* Updated Multires to version 1.47
* Updated the DX Control Panel to Dx9.0c

Download:

The ATI's CATALYST™ CONTROL CENTER

Release Notes:
http://www2.ati.com/drivers/catconcen17307.html

At-a-glance
-Industry’s most stable 3D acceleration control software
-Exceptional graphics performance and breathtaking visual quality
-Safe GPU overclocking, custom profiles, assignable hotkeys
-New programmable features and functions, new developer’s kit
-Frequent updates backed by ATI customer support, user feedback program
-Support for Microsoft Windows XP, XP Media Center Edition Windows 2000

Download:

* CATALYST Control Center - (Supported on the RADEON 9500, RADEON 9600, RADEON 9700, RADEON 9800, RADEON X300, RADEON X600, or RADEON X800 Series of products).
If you’ve already downloaded the CATALYST 4.8 driver and you have one the products listed above, you only need to download the new CATALYST Control Center. Note you must have Microsoft’s .NET Version 1.1 Framework installed.

CODE

http://www2.ati.com/drivers/wxp-CATALYST-CONTROL-CENTER-17307.exe

ATI DNA-drivers 2.9.4.9

* Based on the Official CATALYST 4.9 Beta release
* Updated the install optimizations
-:Normal
-:High_FPS
-:Ultra_FPS
-:Insane_FPS
* Updated the DNA-changer(s) To be based on BATCH files
- this will allow changing the:
-:DNA-drivers Themes
-:OpenGL files
- Without having to reinstall the whole driver
* Added New DNA-drivers themes to the installation
- all icons in the CP and start-menu get the theme chosen
-:HL2
-:Austria
* Readded an DNA-drivers theme
-:Pink

Download:

ATI Catalyst 4.9

Release Notes:
Performance Improvements for CATALYST™ Display Driver Version 4.9

- Doom3 performance improves 10-15% on ATI RADEON™ X800 XT products when anti-aliasing is enabled.
- UT2004 performance improves considerably on the ATI RADEON™ 9500 PRO, RADEON™ 9700 PRO RADEON™ 9800 PRO and RADEON™ 9800 XT products. The benefit can be 25% or more in some circumstances, particularly at extreme graphics settings such as 6xAA + 16xAF.....c.d.tutaj:
http://www2.ati.com/drivers/Catalyst_49_release_notes.html

Download:
Windows 2000/XP

Display Driver,Control Panel,CATALYST Control Center,WDM Capture driver:

ATI Proprietary Linux Driver 3.12.0

Download:

ATI Radeon DNA-DRIVERS 3.0.4.9

* Based on the Official CATALYST 4.9 release
* Updated Installation package logo's
* ATIOverclockingAntiprotection is removed by default (special thanks
- goes out to Unwinder for this)
* Updated the FireGL OpenGL file to driver ver 8.023
* Updated Driver/CP installation background
* Updated support for:
-:ALL-IN-WONDER 9200 SERIES
* Added support for:
-:ECS RADEON 9550 REX 128MB
-:ASUS Extreme AX300SE/T 128MB
-:ASUS Extreme AX600XT-TD 128M
-:C.P. Technologies Inc. RADEON 9250
-:FIC RADEON 9550 128M
-:GeCube RADEON 9550
-:Celestica "Gold Edition" RADEON X300
* Fixed & Updated the DNA-drivers OpenGL Changer to Version 1.1
* Updated the DNA-drivers Theme Changer to version 1.1

Download:

ATI Radeon Omega Drivers v2.5.76

What's New? (2k/XP 2.5.76)
* Based on the official Catalyst 4.9 drivers.
* Removed ATITool from the package, it had many bugs and disabled a lot of stuff, like DVI support and DDC. If you have it installed, I recommend that you uninstall it before installing this set of drivers.
* Re-Enabled Overclocking Anti-Protection, it was missing from last release, sorry.
* Modified the ATI CP, now the Omega Drivers will use a built-in, special RadLinker version with the following features: (some new, some old)

> Uses NO resources.
> Some new settings for both D3D and OGL.
> Can set Automatic Per-application profiles for OGL & D3D applications.
> Desktop Gamma is working and NOT resetting to default after exiting a game.
> Integrated Overclocking.
> No need for Gamma Hotkeys anymore since you can now set an individual Gamma value for each game in their profile and done.
> This new CP was made in conjunction with ChrisW, maker of Radlinker, as an exclusive feature for the Omega Drivers and we will keep adding features in future releases.

* Modified driver installation/uninstall procedure with several new automatic features.
* Since RadLinker is now a vital part of the Omega Drivers, it will not be an option to select during setup anymore, it will now automatically look for and uninstall ANY previous version and replace it with the new one.
* Now, when uninstalling the Setup tools from the Omega options in the Start Menu, you will also have the option to uninstall the Display drivers in one pass.

Known bugs:
* Laptop video playback problem still here, see notes.
* Hibernation and Standby are not working properly, I'm working on a fix.

Important Notes:
1. Mobility users beware, these drivers don't support overlay video acceleration on some chipsets, specially in Sager notebooks with 9600 and 9700 Mobility cards. Other cards may be affected, but I haven't confirmed the bug on them. The last driver set that doesn't have this problem are my 2.5.44 drivers. Sorry for any inconveniences, I'm working on a fix for this matter, but all my tests show that this is an ATI related bug in the drivers and it doesn't have to do with any of the settings on my drivers.
2. CCC will work with the Omega Drivers, but is NOT recommended that you install it, all the functions found in CCC are already included with RadLinker Omega Edition or will be included in a near future as this new CP project develops.
3. The included Radlinker version in these drivers is NOT the one I was planning to release, the intended version will come soon in the form of an update to this set of drivers or in the next set based on the Cat 4.10.

Download:

ATI Pack Catalyst 4.9 Mobility (8.05-040812A) win 2k/XP


* MOBILITY FIRE GL 7800
* MOBILITY FIRE GL 9000
* MOBILITY FIRE GL T2/T2e
* MOBILITY RADEON
* MOBILITY RADEON 7500
* MOBILITY RADEON 9000
* MOBILITY RADEON 9200
* MOBILITY RADEON 9500
* MOBILITY RADEON 9800
* MOBILITY RADEON X300
* MOBILITY RADEON X600
* MOBILITY RADEON X800
* RADEON 9000 IGP Series
* RADEON 9000 XT IGP Series
* RADEON 9100 IGP
* RADEON 7000 SERIES
* RADEON 7200 Series
* RADEON 7500 SERIES
* RADEON 8500 Series
* RADEON 9000 Series
* RADEON 9100 Series
* RADEON 9200
* RADEON 9200 SE
* RADEON 9250
* RADEON 9550
* RADEON 9500
* RADEON 9500 PRO / 9700
* RADEON 9500 Secondary
* RADEON 9600 TX
* RADEON 9700 PRO
* RADEON 9800 PRO
* RADEON 9800 Secondary
* RADEON 9800
* RADEON 9800 SE
* RADEON 9800 XT
* RADEON X600 Series
* RADEON X700
* RADEON X700 SE
* RADEON X800
* RADEON X800 SE
* RADEON X300 Series
* RADEON X700 PRO
* RADEON X700 XT
* RADEON X800 PRO
* RADEON X800 XT
* RADEON 9600 Series


/http://www.station-drivers.com/telechargement/ati/ati%204.9%202kxp%20mobility.exe

Catalyst 4.91

http://www.ati.com/support/infobase/4618.html

* Attempting to start a new game of Psychotoxic may result in the game failing to respond or producing a VPU recover error.

* Users who are experiencing this issue are advised to download and install this driver hotfix. A future CATALYST release is expected to address this issue.

Download:

CATALYST Beta 8.07

Star Wars: Knights of the Old Republic - Randomly hangs system when loading / switching levels

http://www.ati.com/support/infobase/4649.html

-The 8.07 beta driver fixes a random hang issue with Star Wars: Knights of the Old Republic when loading / switching levels. We have received a significant number of bug reports for this issue and feel that it should be addressed as quickly as possible.
-ATI wants to provide its RADEON X700 customers with the same level of performance and gaming experience as shown in the recent RADEON X700 reviews. Unfortunately due to the time requirements to ship RADEON X700s to retail shelves a now out-dated 8.04 driver had to be used for the software CD.
-The 8.07 beta driver includes a memory allocation bug fix for all AGP RADEON products with 256 of MB of memory that significantly improves performance for applications that make intensive us of graphics memory.

Download:

ATI Proprietary Linux Driver 3.14.1

Firma ATI wypuściła nowe sterowniki dla systemów Linux z obsługą pakietów RPM. Z dokumentacji możemy się dowiedzieć, że dodano głównie obsługę układów :
* FireGL V5100
* FireGL V3200
* FireGL V3100
* MOBILITY RADEON 9800
* RADEON X600
* RADEON X300
* MOBILITY RADEON 9000/9100 IGP Series

Fixed Issues:
Graphics acceleration is now available with ATI ALL-IN-WONDER RADEON 8500DV
3D Graphics acceleration is now available on VIA Apollo KT400 systems
Using a DVI connector on some ATI RADEON 9200 series no longer results in the display being blank
Adjusting color saturation during movie playback no longer results in color shift
The display is no longer blank when launching X on an ATI RADEON X800 or ATI FireGL X3

Download:

Radeon Omega Drivers v2.5.90 (8.07 Beta)

What's New?
* Based on the Beta Catalyst 8.07 drivers.
* Fixed Radlinker installation issues, now it should give NO errors.
* Updated the Advanced 3D control panel to include Color/Gamma settings, so I disabled the normal ATI Color tab.
* Enabled WMV hardware acceleration.
* Fixed a bug with some Radeon cards (mostly 8500 and 9000) which caused texture corruption in some 3D games/applications. Thanks to lockves for the tip.
* Fixed a few install/uninstall issues which caused some old settings to stay in the registry even after installing/uninstalling the drivers.
* Enabled Geometry Instancing in supported cards (R300 and up).
* Enabled AI support without the need to use or install CCC.
* The Advanced 3D Control Panel has changed, now both D3D and OGL settings are applied using Global controls in the 3D tab, and specific D3D and OGL settings have been moved to the Options tab. This was the only way to add AI support to the drivers.
* Found the cause of the laptop video playback problem, see note #1 in the readme for the fix.

Known bugs:
* Hibernation and Standby are not working properly, I'm working on this.

.....http://www.omegadrivers.net/ati/radeon_omega_drivers.txt

Download:

ATi Catalyst 4.9 beta Windows 64 bit

/http://www2.ati.com/drivers/wxp64-8-05-040812a-018070E.exe

ATI Radeon DNA-DRIVERS 3.1.4.10b

Zmiany:
* Special thanks goes out to the DNA-drivers BETA-TEAM
- for their hard work on this release..
* Based on the CATALYST beta 8.07 release
* Added Special DNA-drivers birthday release theme's
- based on the site polls
* Added Ati Tray Tools to the package.
- special thanks goes out to Ray Adams for this.
!-Support for CatalystAI
!-Easy Task Tray Configurations
!-OverClocking Support
!-All Functions Of The ATI ControlPanel in your Task Tray
!-NOTE: TO run ATI TRAY TOOLS select it from the DNA-drivers START MENU **
* Updated DNA-drivers Copy Protection©
* Added Dutch installation language * beta
* Updated SoftMOD install
* Added a new tweak that should increase the FPS when
- HighFPS, UltraFPS or InsaneFPS is chosen and Aniso is enabled
* Added support for:
- Radeon X700 SERIES
* Re-added the WDM drivers into the driver install
- version 6-14-10-6246
* Updated Install and Uninstall routine
* Turned off CatalystAI as default.!!
* Added a "DNA-drivers HOMEPAGE" link to the startmenu
* Added a "DNA-drivers Control Panel Logo Maker" link to the startmenu
* Added a "DNA-drivers Donation" link to the startmenu
* Updated overall support..

Download:

ATI Catalyst 4.9 IGP i IXP win 2k/XP

RADEON 9000 IGP/ 9100 IGP
IXP 150/200/250/300,
RADEON IGP 320/330/340



/http://www2.ati.com/drivers/wxp-w2k-catalyst-igp-8-051-040825a-017633c.exe

ATI Catalyst 4.10

Release Notes:
CATALYST™ A.I.
CATALYST™ A.I. allows the driver to intelligently analyze applications and textures to maximize graphics performance and enhance stability while delivering the absolute highest visual quality

Performance Improvement
As with most CATALYST™ releases performance has increased in various situations. The following performance gains are noticed in the game Doom3:

*Performance improves 5 to 8% on the ATI RADEON™ 9500 PRO product
*Performance improves approximately 5% on the ATI RADEON™ 9600 XT
*Performance improves 5 to 9% on the ATI RADEON™ 9700 PRO
*Performance improves 4 to 6% on the ATI RADEON™ 9800 PRO
*Performance improves approximately 4% on the ATI RADEON™ 9800 XT when using higher resolutions
*Performance improves 3 to 14% on the ATI RADEON X800 PRO
*Performance improves 5 to 8% on the ATI RADEON™ X800 XT
*Performance improves approximately 3% on the ATI RADEON™ X300 product
*Performance improves approximately 4.4% on the ATI RADEON™ X600 product

Issues Resolved in CATALYST™ Display Driver Version 4.10

*City of Heros: Playing the game under Windows XP with an ATI RADEON™ 9700 PRO installed no longer results in the game failing to respond.
*Doom3: disabling the object buffers within the game results in the game failing to respond
*Doom3: game corruption is no longer noticed when playing the game under Windows XP with an ATI RADEON™ X800 XT installed, with low or medium quality settings and the image is no longer dark if playing the game with high quality mode settings.
*Enigmo: Playing the game under Windows XP with an ATI RADEON™ 7000 installed no longer results in textures missing from objects that are displayed in the game.
*F1 Challenge: A performance decrease is no longer noticed under Windows XP with an ATI RADEON™ X800 PRO installed
*Ground Control II: Display corruption is no longer seen in the water's reflection when playing the game under Windows XP with an ATI RADEON™ 7200.
*Homeworld 2: Launching the game under Windows XP with an ATI RADEON™ X800 XT installed no longer results in corruption being displayed during the opening cinematics and the game failing to respond
*Joint Operation Typhoon Rising: The game is now working properly when AntiAliasing and full screen effects are set to high
*Psychotoxic: Launching the game under Windows XP with an ATI RADEON™ X800 series installed no longer results in and ATI VPU Recover failure.
*Psychotoxic: The game no longer fails to start when attempting to launch the game under Windows XP with an ATI RADEON™ X800 XT Platinum Edition installed.
*Psychotoxic: Attempting to start a new game under Windows XP with an ATI RADEON™ 9700 PRO installed, results in the game failing to load
*Spiderman2: Playing the game under Windows XP with an ATI RADEON™ 7500 installed no longer results in flashing textures and missing shadows.
*Spell Force: Setting the game options to 1024x768 16bpp, anisotropic filter 2x, texture quality high, and shadow type very high no longer results in shadow effect corruption under Windows XP with an ATI RADEON™ 9200 series installed.
*Starwars: X-Wing Alliance: Display corruption is no longer seen when playing the game under Windows XP with an ATI RADEON™ 9250 installed.
*Wars and Warriors: Joan of Arc: Display corruption is no longer noticed when playing the game under Windows XP.
*Playing games such as StarTrek Elite Force, Serious Sam SE, Vulpine GLMark, Call Of Duty, and Savage no longer results in the games failing to respond when being played under Windows XP with an ATI RADEON™ 9550 or 9600 series installed.
*Installing the ATI Display Driver no longer results in display corruption being seen on the top portion of the HDTV display when an ATI RADEON™ X800 is installed.
*Installing the ATI display driver under Windows XP with an ATI RADEON™ X800 SE no longer results in display corruption appearing on the HDTV connected to the adapter after the reboot.
*The display adapter information is now reported correctly for the ATI RADEON™ X800 series.
*Attempting to play a Java based game or visit a Java based website no longer results in display corruption under Windows XP when either an ATI RADEON 9800 SE or RADEON X800 XT Platinum card is installed and AA is enabled
*Dragging the MS Media Player over to the secondary monitor no longer results in overlay not being available, if SURROUNDVIEW is enabled

Download:
Catalyst 4.10 Windows XP/2000 driver with Catalyst Control Center

MSI Radeon driver v. 8.05 WHQL win 2k/XP

/http://download.msi.com.tw/support/dvr_exe/vga_dvr/ATI_VGA8.05.zip

NGO ATI Optimized Driver v1.6

Release Notes:
* Based on the offical Catalyst 4.10
* Four OpenGL drivers for your selection
* New OpenGL/DirectX tweaks
* Incredible performance under OpenGL games
* ATI's new AI feature

Download:

ATI Optimized Driver v1.6b - (NGO)

* Based on the offical Catalyst 4.11beta (8.07b2)
* Two OpenGL drivers for your selection
* New OpenGL/DirectX tweaks
* Incredible performance under OpenGL games
* ATI's new AI feature
* New Installer with GUI
* Doom III Bugfix (use Normal OGL for D3)

Known Issues:
* Old OGL (OpenGL) has corruption under 16bit color quality mode in few cards
Workaround: Setup your OpenGL games to use 32bit color quality deep BEFORE installation (-32bpp in Counter-Strike command-line will force 32bit)
* Use this driver by your own risk
This Driver is not supported by ATI Corporation.
* X800 unsupported with Old OGL (OpenGL)
Workaround: Use "Normal OGL"

Download:

ATI Radeon DNA 3.2.4.10

* driver Based on the Beta CATALYST 8.07 drivers
* WDM drivers based on the CATALYST 4.10 release (6.14.10.6246
* Updated DirectX Control panel to DirectX 9.0c version
* Updated Normal/High/Ultra and InsaneFPS options
* Added New DNA-drivers theme to the installation
- all icons in the CP and start-menu get the theme chosen
-:Orange (named new when installing)
* Updated support for:
- RADEON 7000 SERIES
- RADEON 9200 SERIES
* Added Support for:
- ASUS RADEON 9550
- ABIT RADEON X600XT
- VISIONTEK Xtasy 9200SE
- VISIONTEK RADEON 9600SE
- SAPPHIRE RADEON 9250
- RADEON 9600 TX
- HIGHTECH EXCALIBUR RADEON 9550 SE SERIES
- Celestica "Gold Edition" RADEON X600 SERIES
**Updated Ati Tray Tools to version v1.0.1.387
++Fixed bug with 3D Renderer. When ATT can not load vertex data.
++Added support for Radeon X700 Series
++Added Memory Timing Editor for X800/X700 Series
++Added support for Geometry Instancing option. (Look in Tweaks section)
++Updated Low Level driver. Also changed name from rvxedit.sys to atitray.sys
++Extended Game Profiles. Added option to switch desktop resolution before starting game.
++Fixed bug when desktop gamma resets to default after game end.
++Fixed bug when ATT can not restore overclocking profile after game end.

Download:

Catalyst 4.10 for Windows 98/ME

- Dated 10/28/04
Issues Resolved in the CATALYST™ Software Drivers for Windows ME:

-Colin McRae Rally 04: Configuring the game to 1280x960 32bpp along with FSAA enabled and FSAA Quality set to 01 results in an error message when applying the changes
-Far Cry: Starting the game under Windows 98/98SE with an ATI RADEON™ 9200 installed and the game video options set to high no longer results in the game failing to start
-Rise of Nations: The game no longer fails to respond when setting the display device to its maximum display resolution and the D3D slider found in the ATI 3D tab to optimal quality
-The ATI Advanced SMARTGART™ tab can now be launched by selecting Start->Run and entering the command smartgart
-Changing the AGP write speed from 4x to 1x no longer results in the Windows 98/98SE operating system failing to load when an ATI RADEON™ 9500 is installed
-The video BIOS and memory information is now displayed when clicking the Detail button found in the ATI Options tab within the ATI Control Panel
-Connecting a television as the secondary display device and selecting the option to Extend My Windows Desktop on to this Monitor now results in the television display becoming enabled.

Full release notes:
http://www2.ati.com/drivers/Catalyst_410_Release_Notes-WinME.html


Download:

Radeon Evolution drivers 1.0

02/11/2004
Based on official Catalyst 4.10. Evolution Drivers are the evolution of the Spirit Drivers, another alternative drivers for Radeon Cards.

http://www.radeonthetop.com/t/fiche.php?id=77

NGO ATI Optimized Driver v1.6c

* Based on the offical Catalyst 4.11beta (8.07b2)
* Two OpenGL drivers for your selection
* New OpenGL/DirectX tweaks
* Incredible performance under OpenGL games
* ATI's new AI feature
* New Installer with GUI
* Doom III Bugfix (use Normal OGL for D3)
* 16bit corruption has been fixed!
* New tools

Important notes:
* Old OpenGL driver is not supporting X800/700/300 series
* use this driver by your own risk!

CATALYST 4.11 Beta

- Windows ME/98 and the ATI RADEON X Series

Release Notes:
http://www2.ati.com/drivers/Catalyst_411b_Release_Notes-WinME.html

Download:
http://www2.ati.com/drivers/wme-8-03-98-3-041103a-019079e.exe

ATI Proprietary Linux Driver 3.14.6

- Doom 3: Random polygons no longer appear throughout the display while playing the game
- 3D Applications no longer fail to respond on RHEL 3.0 with 1GB or more memory installed
- The System no longer fails to respond when moving the mouse around on the screen on some systems

CATALYST 4.11 Windows XP - Oficjalne

*Breed: Playing the game with the display device set to 1024x768 32bpp and AA set to 6x along with AF set to 8x and texture preference set to high performance no longer results in the game failing to respond
*HALO: Attempting to launch the game under Windows XP with an ATI RADEON X800 PCI-E series installed no longer results in the game failing to load. Further information on resolving this issue can be found at: http://www.ati.com/support/infobase/4679.html
*Joint Operation Typhoon Rising: An error message is no longer displayed when exiting the game under Windows XP with an ATI RADEON™ X700 installed. This issue occurs when the game option for Quality Performance is set to 1600x1200. Further information on resolving this issue can be found at: http://www.ati.com/support/infobase/4641.html
*Postal 2: The staircase now displays spots of red instead of becoming entirely red when a protester is killed using a machine gun
*Roller Coaster Tycoon 3: Playing the game under Windows XP with an ATI RADEON™ 7500 series installed no longer results in the building looking bright and appearing to flash
*Serious Sam: Playing the game under Windows XP with either an ATI RADEON™ 9000, 9200, or 9250 installed no longer results in Truform not being applied to OpenGL models
*Star Wars: Knights of the Old Republic. The Windows XP operating system no longer randomly fails to respond when loading multiple levels
*Will Rock: Display corruption and missing textures are no longer noticed in the game
*CATALYST 4.11 includes a memory allocation bug fix for all AGP RADEON™ products with 256 of MB of memory that significantly improves performance for applications that make intensive us of graphics memory
*Importing files that have been captured using Pinnacle Media Center into Windows Movie Maker 2 no longer results in the Windows XP operating system failing to respond when an ATI RADEON™ X300 or X600 is installed
*Display corruption is no longer seen when preview the 3D Pipes screen saver when the display device is set to 2048x1536 16bpp
*Using Windows Movie Maker 2 under Windows XP with an ATI RADEON™ X300 or X600 installed no longer results in corrupt colors being displayed in the preview window
*CATALYST™ CONTROL CENTER: The profile manager is now functioning properly when attempting to launch games such as Doom 3 and Quake 3
*CATALYST™ CONTROL CENTER: Using the option "Restore factory defaults" no longer modifies the previously saved Custom view
*CATALYST™ CONTROL CENTER: Changing the position of the gamma slider for display adapter 1 no longer changes the position of the gamma slider for display adapter 2

Full release notes:
http://www2.ati.com/drivers/Catalyst_411_release_notes.html

Download:

Catalyst 4.12 Beta - Oficjalne

Cytat jedego z pracowników ATI, Terry - CATALYST Maker :

TC (NGO) ATI Optimized driver 1.7

TechConnect hooks you up with two new sets of ATI drivers that meant to boost Half-Life 2 & Counter-Strike source performance by about 5-20% and ofcourse it also improves OpenGL for old and new games by about 20%.

TC ATI Optimized Driver v1.7 Ultra
(supports:9500,9550,9600,9700,9800,X300,X600,X700,X800)
* Based on Catalyst 4.12 beta
* Optimized for Half-Life 2
* Two OpenGL drivers for your selection

Download:

ASUS Catalyst v. 8.061 win 2k/XP

/ftp://ftp.asus.com.tw/pub/ASUS/vga/ATI/ati806_w2kxp.zip

Wersja
ATi Catalyst 4.12 beta 2 (8-08-041111a-019253) win 2k/XP

Link:
http://www2.ati.com/drivers/wxp-w2k-8-08-041111a-019253e.exe

Rage3d i DriverHeaven informują, że są to dokładnie te same sterowniki co pierwsze 4.12 Beta. Zmienił się jedynie link.


CATALYST Windows XP 64-Bit Edition - BETA 2

Radeon Omega Drivers v2.5.97 (4.12 Beta)

What's New? (2k/XP 2.5.97)

* Based on the Catalyst 4.12 Beta drivers.
* New Radlinker installation method, now it should install correctly every time.
* Fixed gamma issues with color control panel.
* WMV acceleration is now off by default, you can turn it on in the Options panel.
* New quick shortcut for Radlinker, just right click your desktop and go directly to all the Advanced 3D settings.
* Fixed Standby/Suspend/Hibernation bug.
* Added a lot of new resolutions for wide screen monitor/dfp users.
* Fixed the Forced Anisotropic settings, now they should not reset to Performance mode.
* Removed the special Counter Strike OpenGL from the package, now that CS:S is available, this is no longer necessary.
* Fixed some uninstall issues, now the drivers should completely be removed if you select to do so.

Download:

ATI Optimized Driver v1.8

Main features:
* Based on Catalyst Beta 4.12b2
* Added ATI Catalyst Control Center (Optional - require .NET framework)
* Added Softmods!
* Two OpenGL drivers for your selection
* Added ATITool to the package
* Added OpenGL driver switcher

Support:
all Radeon cards! includes Mobility and FireGL

Important notes:
* This driver is not supported by ATI Corporation
* Use it in your own risk!

ATI Catalyst 4.12 WHQL

- Ostatnie oficjalne sterowniki od ATI w tym roku, w styczniu 2005 pojawi się nowa seria CATALYST 5.xx


Release Notes:
http://www2.ati.com/drivers/Catalyst_412_Release_Notes.html

Performance:
-Driver efficiency has improved considerably for both Direct3D and OpenGL.
-Numerous D3D games show 2-3% gains at low resolution. The small batch size tests in 3DMark05 show improvements as large as 15% on some products.
-In OpenGL, several game titles show improvements in the lower settings. Wolfenstein - Enemy Territory, for instance, shows gains as large as 15% in low resolution (driver-bound) cases. Doom III performance improves 5-10% at low settings. Call of Duty improves 5-6%.
-Half-Life 2 performance also improves as much as 20% over Catalyst 4.11 in certain sections of the game.

Features:
-Problem Report Wizard for CCC – New menu item in CCC
-Overdrive 3 – for users of X850XT – manual overclocking tool with thermal protection

Stability:
-Half-Life 2: Playing the game on a system containing an Athlon XP CPU no longer results in missing textures occationally being noticed
-Half-Life 2: Intermittent psychedelic patterns are no longer seen when playing the game under Windows XP
-CounterStrike: Playing the game under Windows XP with an ATI RADEON™ X800 series installed no longer results in display corruption being seen in the floor in de_chateau map
-Doom 3: Playing the game under Windows XP with an ATI RADEON™ X800 XT Platinum Edition no longer results in display corruption being seen when pressing CTRL+Alt+Delete followed by clicking Cancel
-Everquest: Playing the game under Windows XP with an ATI RADEON™ X800 XT Platinum Edition installed results in the game displaying a black screen when setting the texture quality to high and having all radio buttons selected
-Medal of Honor: Pacific Assault: Setting the model detail to high and change the game resolution to high no longer results in the game failing to respond under Windows XP with an ATI RADEON™ X800 series installed
-Tron2.0: Setting the display device resolution to 1280x1024 32bpp and setting the display option for the game to 800x600 32bpp no longer results in display corruption being seen in the game cinematics
-Star Wars Knights of the Old Republic: Playing the game under Windows XP with an ATI RADEON™ X800 series installed no longer results in triple buffering failing when enabling the option in the CATALYST™ CONTROL CENTER
-Attempting to rotate the display 90 degrees and play an OpenGL game under Windows XP may result in the game failing to launch
-Enabling clone mode along with theatre mode option under overlay no longer results in WinDVD and the operating system failing to respond when dragging the WinDVD window around the desktop
-Display corruption is no longer noticed when playing a DVD using WinDVD and having subtitles enabled under Windows XP with an ATI RADEON™ X800 series installed
-Attempting to make a change to a saved profile within the CATALYST™ CONTROL CENTER no longer results in the Save button being greyed out
-Connecting a secondary CRT and clicking the X button to close the Enable this display window found in the CATALYST™ CONTROL CENTER Advanced view, no longer results in the window not closing
-Muting the audio during the playback of full screen HDTV video under Windows Media Center Edition no longer results in the video being paused
-Angle information in the rotation modes is now correct for the CATALYST™ CONTROL CENTER
-Enabling Overscan under Windows XP with an ATI ALL-IN-WONDER™ 9600 installed no longer results in the image not being centered properly on the display device
-Connecting a secondary CRT display device and extending the desktop, followed by unplugging the secondary device and hot-plugging a DFP device no longer results in the DFP remaining in the Additional display area when attempting to swap devices
-The Windows desktop brightness no longer dims when playing a DVD and having an HDTV connected as the primary display device
-Playing a DVD under Windows XP MCE with an ATI RADEON™ X800 XT installed no longer results in VPU Recover being activated when attempting to drag or resize the Media Center window
-An error message is no longer displayed when attempting to switch a secondary display device back to the primary display device when using the CATALYST™ CONTROL CENTER

Download:
Windows XP/2000:

Catalyst 4.12 z Control Panel:

CATALYST v. 64-Bit Edition-BETA 3 win XP

/http://www2.ati.com/drivers/wxp64-8-08-041111a-019475e.exe

ATI Optimized Driver 64bit V0.1 Beta

First tweaked 64bit driver around!! This driver is created by ATI and modified by TechConnect Magazine. We designed this driver to provide the maximum performance and Quality.

Main features:
* Based on ATI Catalyst 64bit Beta 3
* Added support for all Radeon cards!!! (includes Mobility and FireGL)
* Added Tweaks

Support:
All Radeon cards! and Windows XP 64bit

Important notes:
* This driver is not supported by ATI Corporation
* Use it at your own risk!


http://files.tizian-security.net/atiodtc64bit01beta.exe

ATI Catalyst v. 4.12 win 2k/XP WHQL

dla:

"ATI MOBILITY RADEON 9600 Series" = ati2mtag_M10, PCI\VEN_1002&DEV_4E50
"ATI MOBILITY RADEON X300" = ati2mtag_M22, PCI\VEN_1002&DEV_5460
"ATI MOBILITY RADEON X600" = ati2mtag_M24, PCI\VEN_1002&DEV_3150
"MOBILITY RADEON" = ati2mtag_M6, PCI\VEN_1002&DEV_4C59
"MOBILITY RADEON 7500" = ati2mtag_M7, PCI\VEN_1002&DEV_4C57
"MOBILITY RADEON 9000" = ati2mtag_M9, PCI\VEN_1002&DEV_4C66
"RADEON 7000 SERIES" = ati2mtag_RV100, PCI\VEN_1002&DEV_5159

/http://www.station-drivers.com/telechargement/ati/ati%204.12%20mobility%202kxp%20whql.exe

TC ATI Optimized Driver 1.8a

Release Notes:
* Based on Catalyst WHQL 4.12
* Removed ATI Catalyst Control Center from the package
* Updated OpenGL drivers
* Added support for more cards
* Added more tweaks
* Installation bug has been fixed
* Few minor bug fixes
* OpenGL Driver Switcher is now working properly
* Improved Quality for OpenGL Games

Supports:
All Radeon cards! including Mobility and FireGL on Windows XP (SP1 and SP2).

Important notes:
* This driver is not supported by ATI Corporation
* Use it at your own risk!

UniAN Catalyst Unified Driver v1.1.412

# 2004/12/24 (v1.1.412)
- Based on ATI Catalyst v4.12
- GLideWrapper v0.08e included
- D3D and OpenGL optimized
- ATI Tray Tools v1.0.1.415 included
- Unlock Overclock Protection
- Support Mobility Chipsets
MOBILITY RADEON™ FIRE GL T2/9000/7500 series
MOBILITY RADEON™ X300/X600/X700 series
MOBILITY RADEON™ 9800/9700/9600 series
MOBILITY RADEON™ 7500/9000/9200 series
MOBILITY RADEON™ series

DNA-drivers 3.5.4.12

* Based on the Official CATALYST 4.12 Release
* Added Special DNA-drivers Xmas Theme
* Added Special "DNA-drivers Help 2 Survive" Thank You Screen
* Upadated All Driver optimizations
* Added Power-Dreams Official German support link (start-menu)
* Added license agreement
* Updated Multilanguage installation process. All installation screens
- will be shown in the right languages now:
-:German
--More languages will be updated in the next DNA-drivers release
* Updated support for:
-:SAPPHIRE RADEON 9600 XT ATLANTIS (thanks to: slivis / MATSUSHIMA Akihiro)
-:X800 Series (R430 Core)
* Added support for:
-:Fujitsu Siemens RADEON 9000 (thanks to: =DST=tinuz97)
-:X850 Series
-:ATI RADEON XPRESS 200 (RS400 / RS480 / RS480M)
*
VERSION:: ATI Tray Tools 1.0.1.415
* Look at readme in the start menu for more details

http://xhardwarereviews.com/downloads/DNA_3.5.4.12.exe


DNA-drivers 3.5.4.12-LITE

[]LITE Special[]
= No OpenGL changer and options
= No WDM Drivers included
= No Ati Tray Tools
= Only Color Theme's
= Only Normal, High, Ultra and InsaneFPS options
[]LITE Special[]
* Based on the Official CATALYST 4.12 Release
* Added Special DNA-drivers Xmas Theme
* Added Special "DNA-drivers Help 2 Survive" Thank You Screen
* Upadated All Driver optimizations
* Added Power-Dreams Official German support link (start-menu)
* Added license agreement
* Updated Multilanguage installation process. All installation screens
- will be shown in the right languages now:
-:German
--More languages will be updated in the next DNA-drivers release
* Updated support for:
-:SAPPHIRE RADEON 9600 XT ATLANTIS (thanks to: slivis / MATSUSHIMA Akihiro)
-:X800 Series (R430 Core)
* Added support for:
-:Fujitsu Siemens RADEON 9000 (thanks to: =DST=tinuz97)
-:X850 Series
-:ATI RADEON XPRESS 200 (RS400 / RS480 / RS480M)

http://xhardwarereviews.com/downloads/DNA_3.5.4.12-LITE.exe

Radeon Omega Drivers v2.5.97a (Cat 4.12)

What's New?
*Based on the Catalyst 4.12 Official drivers.
*Fixed the version typo from previous release.
*Forced some wide screen resolutions that didn't worked on previous set.
*Could have fixed the FireGL OGL problems, need to test it thou.
*Changed readme to html style instead of text.
*Added a new section to readme to include RadLinker specific changes and fixes.

What's new for RadLinker? v2.026

* Fixed installation problems with Windows 9x.
* Fixed GUI problems with Windows 9x.
* Added RadClock back to the package to help set the clock rate during bootup for people that have this problem.
* Added option to remove context menu selection (thus removing ~90% of RadLinker's functionality)
* Added fixed Polish language translation thanks to Adam "Poke" Grubba.


http://koti.mbnet.fi/makere-b/rad_w2kxp_omega_2597a_7z.exe
http://files.tizian-security.net/rad_w2kxp_omega_2597a_7z.exe

Ati FireGL driver v. 8.08

/http://www2.ati.com/drivers/firegl/firegl-8.08-041111a-019501E.exe

ATI Catalyst 5.1

Windows Driver:

New Features:
- CATALYST CONTROL CENTER support for all RADEON class products
- CATALYST CONTROL CENTER ability to disable and pause the 3D Preview
- Clone Mode resolution default setting

Fixes:
- Men of Valor: Buffering issues are no longer noticed when playing the game under Windows XP with an ATI RADEON™ 8500 or 9100 series installed
- Myst URU Ages Beyond Myst: Attempting to turn 180 degrees and head towards the barb wire fence displayed within the game no longer results in the system failing to respond. This issue is known to occur under Windows XP with an ATI RADEON™ X800 XT Platinum Edition installed.
- Richard Burns Rally: Playing the game under Windows XP with an ATI RADEON™ 8500/9100/9200 series installed no longer results in the trees flickering
- Sid Meier's Pirates: Enabling Anti-aliasing no longer results in video flicker being noticed when starting the game
- Playing an mpeg using the media player found in Windows XP Media Center Edition 2005 no longer results in the ATI VPU Recovery failing if it is disabled and then re-enabled
- Connecting a TV and a monitor to an ATI RADEON™ X800 series and having the TV set as the primary display device no longer no longer results in the Video Mode remaining checked when switching to a resolution which is not supported
- Intermittent desktop corruption is no longer noticed when enabling or disabling a secondary display device
- Dragging or resizing the Windows XP Media Center Edition 2005 window no longer results in a VPU recovery when playing video on an HDTV
- Running Maya under Windows XP with an ATI RADEON™ X800 series installed no longer results in display corruption being noticed when moving the mouse
- Attempting to add a custom timing specification such as; 960x724 for the HDTV device properties page, no longer results in the custom timing not being added to the HDTV resolution menu list.
- An error message is no longer displayed when attempting to switch a secondary display device back to the primary display device when using the CATALYST™ CONTROL CENTER
- Installing the CATALYST™ CONTROL CENTER under the Windows XP operating system (French version) now results in the localized French version being installed
- The text now changes and provides the correct information when changing the slider position for CATALYST™ AI
- The Restore Factory Default option is now working for all sub-aspects found in the CATALYST™ CONTROL CENTER 3D tab

Linux Driver:

New Features:
- Drivers for X.org 6.8 are now provided
- x86_64 drivers now available for XFree86 4.3 and X.org 6.8

Fixes:
Second head in Dual Head system is no longer corrupt during login screen
- Display corruption is no longer seen when switching between X-Windows and the Linux text console, and back to X-Windows
- Video playback in Dual Head mode no longer results in an error message being displayed, or the player failing to start
- PCI-Express systems no longer hang after running 3D Applications for long periods
- 3D Applications no longer hang on RHEL 3.0 with 1GB or more memory installed
- XVideo overlay is once again available in Dual Head Mode
- A "drm.h: No such file or directory" error message no longer occurs when compiling the fglrx kernel module
- Stopping and restarting the X server no longer results in memory leaks or hangs on PCI-Express systems


WinXP With CCC:

ATI Optimized Driver v1.9

Release Notes:
* Based on the offical Catalyst WHQL 5.1
* Removed OpenGL selection prompt (avaliable in the start menu)
* OpenGL Driver switcher has been updated
* Few Bug fixes
* Installer has been fixed
* Added ATITool 0.23 to the package


http://files.tizian-security.net/atiodtc19.exe

DNA-drivers 3.6.5.1 / DNA-drivers 3.6.5.1-LITE



VERSION:: DNA-drivers 3.6.5.1 / DNA-drivers 3.6.5.1-LITE
* Based on the Official CATALYST 5.1 Release
* Updated install routine to delete all other modded driver
- sets before installing the DNA-drivers
- The driver can now be installed on top of every other
- ATI driver without any uninstalling of the
- drivers that are running on your system. This includes:
+ ATi Catalyst Drivers
+ ATi Catalyst CCC
+ Omega Drivers
+ ATI Optimized Driver by TechConnect Magazine incl V1.9
+ UniAN Drivers
+ Catalyst Complete and LITE version (Anzak)
* Updated support for:
- ATI MOBILITY RADEON 9000 IGP (Also thanks to malgod)
- RADEON X800 SE
- ATI MOBILITY RADEON X600
- ATI MOBILITY RADEON 9600/9700 (thanks to il bozo del muertes and malgod)
- MEDION RADEON X740XL
- Celestica "Gold Edition" RADEON X600 Series 128MB
* Fixed some installer problems (some cards not installing)
* Added ATi Taskbar Icon Enable/Disable option in the installer (with help from GhoGGi)
* Added ATi HotKey Poller Enable/Disable option in the installer (with help from Judas)
* Fixed AmericasArmy Theme installation
* Updated the ATI TRAY TOOLS installation it's fully automated now
* Added FPS name tags to the device description, Control-Panel and Add or Remove Programs
* Fixed 60HZ bug
* Updated custom resolutions (Also thanks to Omegadrive for this)
* Renewed and updated (Direct3d and OpenGL) special FPS options now you can choose from:
+ Normal FPS
+ Medium FPS
+ High FPS
+ BenchMark FPS
+ Source FPS
+ AmericasArmy FPS
* Updated read me
* Deleted special OpenGL files. They are not needed any more.
* Fixed ATI Tray Tools Problems
VERSION:: ATI Tray Tools 1.0.1.0.1.500
* Look at read me in the start menu for more details
VERSION:: DNA-drivers 3.6.5.1-LITE
* No WDM Drivers
* No ATI TRAY TOOLS
* No DNA-driver Themes
* Only Normal, Medium and High FPS options




/http://www.treiber-koenig.de/e107_files/downloads/DNA_3.6.5.1.exe

/http://www.treiber-koenig.de/e107_files/downloads/DNA_3.6.5.1-LITE.exe

Radeon Omega Drivers 2.6.05a (Catalyst 5.1)

- Wersja poprawiona, finalna.

What's New in Omega Drivers? v2.6.05a

* Based on the Catalyst 5.1 Official drivers.
* Added support for a few new PCI-X video cards.
* Separated the 9700 and 9800 soft mods, some people with 9500 cards where reporting problems using the unified mode I tried in previous sets, now it should be ok.
* Updated Multires to version 1.49.
* Updated Driver Cleaner Omega Edition to latest version. (thanks Ruud)

What's new for RadLinker? v2.030

* Fixed bug where the RadClock service is not removed during an uninstall.
* Added ability to select from the unified tabs (3D and Options) or separate DirectX and OpenGL tabs.

http://www.accesswave.ca/~sruxton/drivers/rad_w2kxp_omega_2605a_7z.exe
http://files.pc-x.org/rad_w2kxp_omega_2605a_7z.exe

DNA-ATi 3.6.5.1a / DNA-ATi 3.6.5.1a-LITE

VERSION:: DNA-ATi 3.6.5.1a
* Based on the Official CATALYST 5.1 Release
* Updated modded driver deletion for:
- Omega Drivers 2.6.0.5
- TechConnect 1.7 Ultra
* Updated Source FPS install to have specific card optimizations for:
- RADEON - 8500/9000/9200/9500/9600/9700/9800/X Series
- MOBILITY - 9600/9700/9800/X Series
* Changed name to DNA-ATi drivers
* Fixed installation problems from previous release
* Updated Install Routine should install even faster now
- Without background install image
* Updated Widescreen resolutions
* Fixed High FPS naming (was named Fast)

http://www.dna-drivers.nl/downloads/DNA_ATi_3.6.5.1a.exe

_______________________________________________________________________________________________________________________


VERSION:: DNA-ATi 3.6.5.1a-LITE
* No WDM Drivers
* No ATI TRAY TOOLS
* No DNA-driver Themes
* Only Normal, Medium and High FPS options

http://www.dna-drivers.nl/downloads/DNA_ATi_3.6.5.1a-LITE.exe

_______________________________________________________________________________________________________________________


ATI CATALYST 5.2

RELEASE NOTES:
http://www2.ati.com/drivers/Catalyst_52_release_notes.html

New Features:
This section provides information on new features introduced in the latest release of the CATALYST™ Software Suite.

The CATALYST™ Software Suite 5.2 introduces 3D setting options to the CATALYST™ CONTROL CENTER system tray. The shortcut allows the user to easily adjust their 3D settings without having to load the CATALYST™ CONTROL CENTER.

The 3D setting submenu will be found in the Adapter menu of the system tray. When a user selects the 3D submenu option, the following options will be made available:

*Anti-Aliasing. Application managed options include, 2X, 4X, 6X, and Enable Temporal Anti-Aliasing
*Anisotropic filtering. Application managed options include, 2X, 4X, 8X, and 16X.
*CATALYST™ A.I. (For RADEON™ 9700 and above). Options include:
-Disabled
-Standard
-Advanced
*Mipmap detail level. Options include; High performance, Performance, Quality, and High quality.
*TRUFORM™. Options include; Application pref, or Always Off.
*Wait for vertical refresh. Options include; Always off, Off unless application specifies, On unless application specifies, and Always on
*Direct3D Setting. Options include; Enable geometry instancing, Support DXT texture formats, and Alternate pixel center
*OpenGL Settings. Options include; Triple buffering, and Force 24-bit Z-buffer depth
This feature is supported on ATI RADEON™ 9500 series or higher product line.

Performance Improvements:
*Efficiency improvements in vertex processing have produced performance enhancements in key applications such as Far Cry and 3DMark05 on RADEON™ X850, X800 and X700 series products
*Far Cry "Regulator" and "Volcano" scores are up as much as 20% on RADEON™ X800 PRO at 1600x1200 resolution
*3DMark05 gains range from 1-3% on RADEON™ X800 series products to as much as 9% on some RADEON™ X700 configurations

Issues Resolved in CATALYST™ Display Driver Version 5.2:
*4x4 Evolution2: Attempting to play the game under Windows XP with an ATI RADEON™ X300/X600 series installed no longer results in the operating system failing to respond when the screen is set to 1600x1200 32bpp and OpenGL Renderer is enabled
*4x4 Evolution 2: Display corruption is no longer noticed when having the display set to 1600x1200 32bpp along with the texture detail set to high and split screen rendering enabled
*Serious Sam: Playing the game under Windows XP results in the display flashing when TRUFORM is enabled
*Sims 2: Playing the game Veronaville under Windows XP while having the desktop set to 1024x768 32bpp along with AA set to 6X no longer results in corruption being noticed in the fields
*Selecting the option; Enable Video Mode, results in the CATALYST™ CONTROL CENTER not being able to return to the default setting for the Enable Video Mode option
*Switching language support for the CATALYST™ CONTROL CENTER no longer results in the slider bar for the engine clock being enabled when the option found in OVERDRIVE™ is locked
*Navigating to View->Define a Custom View and deselecting all options found in the 3D option of the Edit Custom View tab, no longer results in the Standard Settings option remaining selected
*Intermittent failure of the VPU Recover report not being sent is now resolved
*Double-clicking the slider bar found in CATALYST™ A.I. no longer results in the Disable CATALYST™ A.I. option becoming de-selected
*Disabling 3D preview no longer results in the preview continuing to run on a secondary display device
*Having the 3D preview running on the secondary display adapter and attempting change display modes, no longer results in the primary display device displaying a black screen and error messages appearing
*English is no longer the default language when installing the CATALYST™ CONTROL CENTER under Windows XP Japanese version
*The CATALYST™ CONTROL CENTER Version number is now displayed correctly in all localized languages
*The Display Manager Notification dialog box is now displayed in the correct localized language
*The OpenGL driver is no longer disabled after boot up when both AGP Read and PCI Read are disabled


Version 5.2 with CATALYST™ Control Center (29MB)
http://www.ati.com/home/online/CatalystCCCdriver.html

Version 5.2 with ATI Control Panels (23MB)
http://www.ati.com/home/online/CatalystXPdriver.html

_______________________________________________________________________________________________________________________


CATALYST Windows XP 64-Bit Edition - BETA 4

RELEASE NOTES:
http://www2.ati.com/drivers/xp64amd.html

http://www2.ati.com/drivers/wxp64-8-10-050119a-019475e.exe

ATI Catalyst v. 5.2 (8102) win 2k/XP WHQL

Date driver: 01/02/2005
Driver version: 6.14.10.6512
whql: 17/02/2005
Multi langues: yes
Langue (control center) : 24 langues (Arabic, Traditional Chinese, Simplified Chinese, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hebrew, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish, Thai, Turkish)
Version (control Center) : 1.1.1858.40280
OS : Windows 2000/Xp

/http://www.station-drivers.com/telechargement/ati/ati%205.102.exe

ATI Catalyst v. 5.3 win 2k/XP

/http://www2.ati.com/drivers/wxp-w2k-catalyst-8-111-050222a-021277c.exe

UniAN Catalyst v1.1.53

-Based on the Official ATI Catalyst 5.3 Drivers. These Drivers have Direct3D and OpenGL optimizations
-2000/XP
-Changes in this Version
-Based on the Official ATI Catalyst v5.3
-GLideWrapper v0.082d inclusion
-D3D and OpenGL optimization
-ATI Tray Tools v1.0.1.538 inclusion
-Mobile support
-Release Date : March 26, 2005
-WHQL Certified : N/A

ASUS Catalyst for AX Serie v. 5.03 win 2k/XP

/ftp://ftp.asus.com.tw/pub/ASUS/vga/ATI/ati811_w2k_xp.zip

DNA-ATI v3.8.5.3 SLE (2000/XP)

Changes in this Version:
-Based on the Official Catalyst 5.3 Release
-No SoftMod installations (will be back next release!)
-No AmericasArmy, Benchmark, Source install options (will be back next release!)
-No DNA-ATi Themes & Changer (will be back next release!)
-Updated modded driver deletion for:
*ATI Optimized Driver by TechConnect Magazine v2.1
-Updated/Added support for:
*Radeon X850 PRO (R481)
*Radeon X850 XT (R481)
*Radeon X850 XT Platinum Edition (R481)
*MSI RX700PRO-TD128E
*MSI RX9550SE T128
*Radeon X300 Series
-Fixed WideScreen resolution problems
-Updated modded driver deletion (general updates)
-Updated ATI Tray Tools installation/uninstall routine
-Fixed Spanish language Normal Install option not installing
-Updated previous DNA-Drivers directory uninstall
-Fixed WDM installation problems and updated WDM for Windows XP MCE 2004/2005 (with help from ThaDemon)
-Updated ATI Tray Tools to version v1.0.1.5128
-Look at read me in the start menu for more details

http://www.mvktech.net/index.php?option=com_remository&Itemid=26&func=download&filecatid=1038


_______________________________________________________________



ATI CATALYST 5.4

RELEASE NOTES:
http://www2.ati.com/drivers/Catalyst_54_release_notes.html

Fixed in this driver:
* 3DMark2001: A black screen is no longer displayed when launching 3DMark2001 after launching Aquamark3 when the CATALYST™ CONTROL CENTER is installed
* Pacific Fighters: Playing the game after playing any track for a short period of time and having the landscape detail set to perfect no longer results in the clouds becoming blocking when flying
* Sail Simulator 4: Attempting to play the game under Windows XP with an ATI RADEON™ 9800 XT installed no longer results in the operating system failing to respond and rebooting
* SolidWorks 2004: Display corruption is no longer noticed when setting the AA to 6X and AF to 16X
* Splinter Cell: Depth buffer corruption noticed on the ATI RADEON™ X800 PRO is now resolved
* Star Wars Knights of the Old Republic: Loading the Dantooine level of the game under Windows XP no longer results in slow game performance
* Using the ATI Problem Report Wizard under Windows XP SP2 with an ATI RADEON™ X850 XT installed no longer results in an error message appearing when clicking the Finish button for the problem report
* CATALYST™ CONTROL CENTER: An option to select Yes or No to changes made in SMARTGART™ is now displayed when clicking the Apply button in SMARTGART™
* CATALYST™ CONTROL CENTER: Playing a video clip in the background and entering the Overlay page found in the Video section no longer results in the default value for the Hue not being reapplied unless the CATALYST™ CONTROL™ CENTER is closed and re-launched
* CATALYST™ CONTROL CENTER: Selecting Germany as the language no longer results in some of the text overlapping each other on the Unlock button
* CATALYST™ CONTROL CENTER: Selecting Netherlands (Dutch) as the language no longer results in some of the text in the Hotkey manager being cut off
* CATALYST™ CONTROL CENTER: The Bus setting information is now displayed in the Graphic Hardware section of the Information Center found
* CATALYST™ CONTROL CENTER: The Display Manager Wizard no longer contains a Component Video single display setting message, when multi-display desktop mode is selected
* CATALYST™ CONTROL CENTER: Custom modes can only be applied if the display device can support the mode selected
* Attempting to apply a higher refresh rate to a non-DDC monitor no longer results in the refresh rate reverting to 60hz.
* SXGA+ LCD panel flicker is no longer noticed when the frame buffer (UMA size) is set to 32MB or 64MB


Windows 2000/XP

Version 5.4 with ATI Control Panels
http://www2.ati.com/drivers/wxp-w2k-catalyst-8-121-050322a-022141c.exe

Version 5.4 with CATALYST™ Control Center
http://www2.ati.com/drivers/wxp-w2k-catalyst-ccc-8-121-050322a-022141c-english.exe

x64 5.4 driver
http://support.ati.com/ics/support/default.asp?deptID=894
http://www2.ati.com/drivers/wxp64-8-12-050317m-022144c.exe

ATI Catalyst Tweak Guide *Updated*
http://www.tweakguides.com/ATICAT_2.html

Porównania i testy nowych sterowników ATI Catalyst 5.4
http://www.rage3d.de/artikel/vergleiche/catalyst_englisch/seite1.php
http://www.ngohq.com/articles.php?go=read&arc_id=12


NGO ATI Optimized Driver v2.4 (Cat 5.4)

Changes:
• Updated to Catalyst 5.4
• OpenGL Driver Switcher has been updated
• Added support for more X800/X850 cards.

Notes:
• The author is not responsible for any damage.
• This driver is not supported by ATI Corporation.
• Always Uninstall the current driver before installing a new one

Included Utilities:
• ATI Tray Tools - Control Panel,Tweaker,Overclocker.
• Windows XP Universal Tweaker v0.3 - This small wizard utility capable to perform cleanup and to Tweak: Windows Memory management, Connection and MTU Settings and perform DNS cleanup, Tweak NTFS Partitions, Windows boot-time boost.
• OpenGL Driver Switcher - Switch between the old and the new OpenGL drivers on the fly.

Big Thanks to Ray Adams the Author of ATI Tray Tools.


http://www.ngohq.com/files.php?go=cat&dwn_cat_id=9
http://www.sunsite.org.uk/sites/ftp.guru3d.com/download/guru3d.com/ati/ngo/ngo-ati-24-[Guru3D.com].exe

ATI Catalyst 5.4 WHQL x64

The CATALYST™ 5.4 software suite for Windows XP Professional x64 Edition contains the following:

RADEON™ display driver 8.12
ATI Control Panel
Desktop product family support

The CATALYST™ software suite is designed to support the following ATI desktop products:

RADEON™ X850
RADEON™ X800
RADEON™ 9800 series
RADEON™ 9700 series
RADEON™ 9600 series
RADEON™ 9500 series
RADEON™ Xpress 200 series

Radeon Omega Drivers 2.6.25 (Cat 5.4)

Changelog:
-Based on the Catalyst 5.4 Official drivers.
-Updated a lot of the internal tweaks for Mobility 9200 cards.
-Updated some other tweaks for all cards.
-Removed some redundant files from package.
-Added new option to installer: now you can select between installing with or without Radlinker, in case some of you can't use Radlinker for some reason or use another 3rd party tweaker.

http://212.72.183.122/treiber/rad_w2kxp_omega_2625_7z.exe

Radeon Omega Drivers 2.6.25 (Catalyst 5.4) (Updated)

DNA-ATi 3.9.5.4 / DNA-ATI 3.9.5.4-LITE

* Based on the official CATALYST 5.4 release
* Updated DNA-ATi-LITE package description
* Fixed X850 installation problems
* Added new tweaks and fixed widescreen mode problems for
- Desktop and mobility products.
* Included new DNA-ATi optimization profiles version 1.0
- Switch between optimization options on the fly:
- Normal
- Medium
- High
- AmericasArmy
- BenchMark
- Source
- Counter-Strike (new Counter-Strike profile)
- Bia (new Brother In Arms profile)
- Driv3r (new Driver3 profile)- The profiles can be accessed from the DNA-ATi start menu shortcut
- under the Optimization_Profiles tab. (more profiles will follow soon)
* Updated DNA-ATi Theme changer to version 1.3
* Updated DNA-ATi OpenGL changer to version 1.3
* Updated modded driver deletion for:
- Radeon Omega Drivers v2.6.12
- ATI Optimized Driver by TechConnect Magazine v2.4
- ATI Optimized Driver by TechConnect Magazine v2.3
- ATI Optimized Driver by TechConnect Magazine v2.2
* Fixed X800 PRO installation problems
* Did a complete DNA-ATi internal overhaul
* DNA-ATi themes are back
* SoftMod installations are back
* Updated / Added support for:
- FireGL products / ATI FireGL V3100 / ATI FireGL V5000
- ALL-IN-WONDER X600 Series
- ALL-IN-WONDER X800 Series
- ALL-IN-WONDER X800 Series
- RADEON 9600 Series

VERSION:: ATI Tray Tools 1.0.1.528
* Look at read me in the start menu for more details

VERSION:: DNA-ATi 3.9.5.4-LITE
* No WDM Drivers
* No ATI TRAY TOOLS
* No DNA-ATi Themes
* No Special CounterStrike OpenGL driver
* No DNA-ATi OpenGL Changer
* No DNA-ATi Theme Changer

ATI CATALYST 5.5


RELEASE NOTES:
http://www2.ati.com/drivers/Catalyst_55_release_notes.html

Issues Resolved in Catalyst™ Software Suite 5.5

* 3DMark05: Running the application under Windows XP for extended periods of time no longer results in the operating system failing to respond when using an ATI Radeon™ X700 PRO
* Ashli Viewer sample Wood: Display corruption is no longer noticed when Anisotropic Filtering set to 4x or above
* Ashli Viewer v1.6.0: Running the application under Windows 2000 and launching a sample item found in the Programs & Shaders no longer results in corruption being displayed in the sample item
* City of Heros: Playing the game under Windows XP with an ATI Radeon™ Xpress 200 series installed no longer results in the characters in the game appearing corrupted
* Freedom force VS The 3rd Reich: Playing the game under Windows XP with an ATI Radeon™ 8500 installed no longer results in the super hero character attributes appearing blank
* Imperial Glory Demo: Playing the game under Windows XP with an ATI Radeon™ X800 installed no longer results in the game failing to respond
* Star Wars Knights of the Old Republic 2: Setting the graphic option in the Catalyst™ Control Center to Optimal Quality, followed by launching the game and setting the resolution option to 1600x1200, no longer results in a performance drop being noticed
* Star Wars Knights of the old republic: Loading the Dantooine level of the game under Windows XP no longer results in slow game performance
* Setting the desktop display to 800x600 or 1600x1200 16/32bpp no longer results in the incorrect display resolution information being provided when checking the video control panel in the Catalyst™ Control Center
* Setting the display device to 1080i no longer results in the text on the custom format being illegible
* Setting a customized resolution for 720p now works properly when maintaining the aspect ratio
* Moving the TV to desktop2 and selecting swap device or double up no longer results in the CRT being in panning mode and display corruption being seen on the TV
* Having a TV connected as the only display device and clicking the OK button in the ATI displays tab found in the Advanced section of the Display Properties results in a flash of the TV image being noticed
* Connecting and enabling an HDTV and entering the properties page for the HDTV no longer results in the D3/D4 options being available in the D-Connector Control Panel
* The occasional Windows error messages no longer occurs when booting into extended desktop under Windows XP when using an ATI Radeon™ X300 or X600
* Corruption is no longer seen when connecting a secondary display device and moving the primary display device to the left of the secondary device, followed by disconnecting the primary display device and then reconnecting it
* Previewing or launching the aquarium screen saver under Windows XP Media Center Edition no longer results in the operating system failing to respond
* RF online game compatibility issue with all ATI Radeon™ series
* Launching the Catalyst™ Control Center help files from the Start->All Programs->Catalyst™ Control Center now results in the localized version of the help file being displayed
* Catalyst™ Control Center: Running the French custom install no longer results in a NewFeature1 component being listed
* The link found in the second and third help page for the Change Desktop Settings found in the Japanese version of the Catalyst™ Control Center no longer cross-references to an incorrect help page
* A black screen is no longer displayed when launching AMCap and attempting to view video from the tuner when using either the svideo or composite inputs
* Display corruption is no longer noticed on the TV when setting the TV format to PAL-B and attempting to adjust the flicker removal in the TV Advanced option
* Having a TV and CRT connected and clicking on Preview Automatic adjustment in the Optimize Media Center no longer results in both display devices displaying a black screen

Windows 2000/XP

Z CATALYST™ Control Center
http://www2.ati.com/drivers/5-5_xp-2k_dd_ccc_wdm_enu.exe

Z Control Panel
http://www2.ati.com/drivers/5-5_xp-2k_dd_cp_wdm.exe

ATI Multimedia Center 9.08
http://www2.ati.com/drivers/9-08_mmc_enu.exe


Nowe testy i porównania:
http://www.ngohq.com/articles.php?go=read&arc_id=19

ATI Catalyst 5.6

RELEASE NOTES:
http://www2.ati.com/drivers/Catalyst_56_release_notes.html

Performance Improvements:
* Doom3: A performance gain of up to 7% is noticed at lower resolutions as a result of more efficient memory use
* Chronicles of Riddick: A performance gain of up to 10% is noticed as a result of more efficient storage of vertex data
* Halo: A performance gain of up to 20% is noticed as a result of generic driver Z-optimizations
* 3DMark05: A performance gain of up to 5% is noticed as a result of generic driver Z-optimizations

Issues Resolved in Catalyst Software Suite 5.6:
*MS Works 8.0: Running the application under a German edition of Windows XP no longer results in an error message being displayed when clicking on the calendar
* MVP Baseball 2004: Playing the game under Windows XP with an ATI PCIe product installed no longer results in brief display corruption being noticed when there is a transition between certain frames
* Shadow Vault: Setting the desktop resolution to 1280x1024 and the D3D slider to Optimal Quality in the ATI 3D tab no longer results in corruption being displayed in the opening cinematic and no longer results in the game failing to respond along with a VPU recover message
*VirtualSkipper3: Launching a challenge in the game no longer results in the game failing to respond while the challenge is loading
* Assigning a hotkey to increase the overlay gamma no longer results in the hotkey not functioning properly when playing an MPEG using the Windows Media Player
* Installing the display driver and the Catalyst Control Center, no longer results in a runtime error and the system tray failing to start when attempting to create multiple user accounts and enabling fast user switching
* The Catalyst Control Center installation now checks for the installation of the Microsoft .Net Framework before preceding with the install of the Catalyst Control Center. This resolves an error message that was displayed when attempting to launch the Catalyst Control Center
* The Scale to Full Screen option found in the Theater Mode settings of the Catalyst Control Center is now available when using multiple display devices and enabling clone mode
* The text that describes the preferred setting for the Plugged-in option found under the Powerplay settings of the Catalyst Control Center is no longer missing
* Catalyst Control Center: The Apply and Discard button are no longer disabled when disabling Overdrive
* Moving the TV to desktop2 and selecting swap device or double up no longer results in the CRT being in panning mode and display corruption being seen on the TV
* The Optimal Performance text string is no longer missing in the Standard settings of the 3D options found in the Catalyst Control Center
* The Color option found under Smartshader is no longer missing when selecting the option No Preview for the Catalyst Control Center
* Changing the regional option found in the control panel to Japan followed by installing the display driver no longer results in the TV format failing to change in accordance with the regional option
* Selecting German as the language for the Catalyst Control Center no longer results in the heading for the Digital Panel Attributes page being cut-off
* Creating a hotkey to adjust any video overlay option no longer results in the overlay option not changing when executing the hotkey
*Black text boxes are no longer displayed in the Overdrive option of the Catalyst Control Center when selecting the Windows XP Silver Color Scheme
* The language translation of Hide Toolbar Text in the Preferences tab of the Catalyst Control Center is now correct for the Korean language
* Paragraph truncation is no longer noticed in the confirmation dialog box when using the Korean language option and making a change to the Graphic Settings in the Display Options of the Catalyst Control Center
* Changes to the Overlay Display in Clone Mode option found in the Theater Mode settings of the Catalyst Control Center are now retained
* The Scale to full screen option found in the Theater Mode Settings of the Catalyst Control Center is now working properly
* The title for the ATI Setup Wizard failed dialog box is no longer missing when running the installation under Windows XP Korean version
* Display corruption is no longer noticed when resuming from a full screen DOS session and attempting to run a 3D application under Windows XP in a system containing an ATI Radeon Xpress 200 series product
* Connecting an HDTV to an ATI Radeon Xpress 200 series no longer results in the selection of D3 and D4 in the HDTV properties
* Connecting both a DVI display device and an HDTV to an ATI Radeon Xpress 200 series no longer results in the DVI monitor failing to enter power save mode
* The back lighting is no longer disabled after the installing of the display driver in a system containing an ATI Radeon Xpress 200 series
*Setting the Anti-Aliasing option to 4x and running an application that supports non-standard modes such as 1360x1024 no longer results in the application being displayed incorrectly
* LCD Response Time Composition is now enabled and automatically turns off if video playback is below a predefined threshold
* Adding a secondary ATI display adapter to a system contain an ATI Radeon Xpress 200 series on board no longer results in hesitation being noticed when using the hot-key function to switch between display devices
* Having a TV connected as the only display device and clicking the OK button in the ATI displays tab found in the Advanced section of the Display Properties no longer results in a flash of the TV image being noticed
* Having a TV and CRT connected and clicking on Preview Automatic adjustment in the Optimize Media Center no longer results in both display devices displaying a black screen

Catalyst™ for Windows XP
Z CATALYST™ Control Center

ATI Catalyst v. 5.6 Mobilie Serie win 2k/XP WHQL

/http://www.station-drivers.com/telechargement/ati/ati%20catalyst%205.6%20mobility%202kxp%20whql.exe

Radeon Omega Drivers 2.6.42

http://files2.guru3d.com/ati/omega/rad_w2kxp_omega_2642_7z_[guru3d.com].exe

http://212.72.183.122/treiber/rad_w2kxp_omega_2642_7z.exe

ASUS Catalyst for Axxx Serie v. 5.6 win 2k/XP

/ftp://ftp.asus.com.tw/pub/ASUS/vga/ATI/ati8141_w2kxp.zip

Pierwsza BETA wersja sterowników dla kart graficznych z procesorami ATi, do nowego systemu Windows Vista.
Więcej szczegółowych informacji na stronie Ati.

CATALYST 5.7 for Windows XP (With Control Panel)

waga: 25.1 MB

Lezy tutaj:
/http://www2.ati.com/drivers/5-7_xp-2k_dd_cp_wdm_24085.exe

Skaner

Radeon Omega Driver 2.6.53

waga 17.91Mb
Catalyst 5.7 - (Windows XP/2000/2003)

ATI Catalyst 5.8

Release Notes:
http://www2.ati.com/drivers/Catalyst_58_release_notes.html

z Catalyst Control Center:

ATI Mobil v. 5.8

Version: 8.162.0.0
Whql: 13/08/2005
Windows 2k/XP

/http://www.station-drivers.com/telechargement/ati/ati%20mobility%205-8-2kxp-whql.exe

Omega ATI Radeon Driver 2.6.61 Win 2K/XP

What's new in version v2.6.61:
* Based on the Catalyst 5.8 Official drivers.
* Added support for x700 Mobility cards.

http://berbb.com/omega/rad_w2kxp_omega_2661_7z.exe

http://ftp2.hwupgrade.it/ottimizza_il_tuo_pc/driver/schede_video/ati/omega/rad_w2kxp_omega_2661_7z.exe

ATITool 0.25 Beta 8

Bezpłatne narzędzie służące do podkręcania kart graficznych. Aplikacja zwiększając taktowanie pamięci oraz rdzenia graficznego wyświetla animację 3D, co pozwala na bieżąco sprawdzać, czy na ekranie nie pojawiają się artefakty oraz umożliwia ustawienie maksymalnej, bezpiecznej częstotliwości taktowania dla urządzenia. ATITool umożliwia tworzenie własnych profili oraz ich ładowanie, wraz ze startem systemu.

Zmiany:
- Fix for "Kernel mode driver is not running" under Win2k
- Fixed 2D/3D clocks not getting properly saved into profile
- Current Clocks readout refreshes every second if ATITool is the active window,
5 seconds if not active
- Editing the text boxes above the sliders enabled "Set Clock" button
- Added monitoring for M28
- Fan control fixed working on ASUS, dynamic still not right

ATI Catalyst 5.9

-Battlefield 2: The game no longer exits to the Windows desktop after the game logo is displayed
-Endorphin: Running the application under Windows XP no longer results in hesitation being noticed during simulation or playback
-Max Payne 2: Erratic mouse pointer behavior is no longer noticed within the game's menu after a short time period of game play
-MU: Opening a chat window and playing the on-line game no longer results in Hesitation being noticed when pressing the Enter key
-Silent Hunter 3: Enabling all video options within the game and setting the particle density to 100, along with setting Anti-Aliasing to 6X and Anisotropic Filtering to 16x, no longer results in display corruption on the left portion of the display
-Star Wars Knights of the Old Republic 2: Running the Dantoonie level of the game no longer results in hesitation being noticed
-Terminator 3: The game no longer fails to respond and a VPU Recover message no longer occur after loading the game character
-The Catalyst Control Center no longer displays blank pages when quickly exiting and re-launching the Catalyst Control Center while hot-plugging or hot-unplugging a CRT display device
-Installing an All-in-Wonder into a system containing an ATI Radeon Xpress 200 series and an ATI Theater 550 Pro no longer results in loss of signal error message when setting the country region to Sweden
-HDTV support may still be displayed within the control panel with ATI products that do not support HDTV
-Connecting two display devices using the DVI and CRT connectors on a system containing an ATI Xpress 200 results in the system failing to resume when entering standby state
-Catalyst Control Center: The Overdrive Automated Clock Configuration Utility may continue running even after the user selects apply or cancel in the utility's confirmation window
-Connecting two display devices using the DVI and CRT connectors on a system containing an ATI Xpress 200 no longer results in the system failing to resume when entering standby state. Further details can be found in topic number 737-19538
-Catalyst Control Center: Connecting a TV as the only display device to an ATI Radeon X300/X600 series no longer results in the Signal Format found in the Adjustment page of the TV Properties being labeled as Unknown
-Three of the four ATI entries found in the Add or Remove Programs for Windows XP Japanese version, are no longer displayed in English
-The Catalyst Control Center shortcut is now removed when selecting to uninstall the ATI software driver
-Catalyst Control Center: The Overscan slider bar now displays a Minimum, Medium and Maximum setting for All-in-Wonder SCART boards
-WDM version numbers are no longer documented in the Information Center of the Catalyst Control Center for ATI products that do not support WDM drivers
-An intermittent error message is no longer experienced when selecting all of the aspects within the Catalyst Control Center quickly
-The limited account user no longer has the ability to add a short cut for the profile manager in the system tray
-Overdrive settings no longer revert back to the default setting when connecting a secondary display device and enabling extended desktop mode
-Moving the slide bar found in the Adjustments aspect of the Catalyst Control Center are now restored to their pervious levels when clicking the discard button
-A horizontal shifting issue when using the capture application is now resolved
-Changes to the audio settings are now retained after a system reboot when using the ATI Theater 550 Pro
-Resuming from suspend mode no longer results in the audio level returning to its default value
-Poor quality of static texture and scrolling text when watching live TV on system containing an ATI All-in-Wonder X800 series product is no longer noticeable
-Catalyst Control Center: The hot-key list is now dynamically populated to reflect the enable/disable status
-The Use Manual Detection Only translation for traditional Chinese is now correct
-The Overscan/Underscan option found in the Catalyst Control Center has now been translated properly for the Russian language
-The ability to navigate within the Catalyst Control Center while a confirmation dialog box for the Catalyst Control Center is displayed is no longer possible
-The Apply button is now available when making a change to 3D aspect page in the Catalyst Control Center
-Intermittent launch failures of the Catalyst Control Center is now resolved
-Connecting two display devices to the Radeon X700 using the DVI and CRT connectors no longer results in display corruption being noticed when booting Windows XP
-Connecting an HDTV and a CRT display device followed by disabling the CRT and rebooting the system no longer results in the HDTV failing to display an image and the CRT becoming active again
-HDTV support no longer fails to be detected properly after connecting a CRT and TV to the ATI Radeon Xpress 200 series
-Display corruption is no longer noticed on the secondary display device when disabling extended desktop mode
-Setting Anti-Aliasing to 4x in the Catalyst Control Center no longer results in a blank window or an error message being displayed when launching Java plug in
-Hesitation is no longer noticed during the opening cinematic of Madagascar when rotating the display device by 180 degrees
-Display corruption is no longer noticed when running the Codecreatures benchmark when the FrameBuffer is set to 64MB on system containing an ATI Radeon Xpress 200 series
-An extraordinarily long delay is no longer noticed when resuming from an S3 state
-Overlay corruption is no longer noticed when turning off the primary display device in systems containing an ATI Radeon Xpress 200 series
-The display resolution options of 800x600 and 640x480 mode are no longer available within the Display Manager aspect after rotating a desktop that is rotated by 90 or 270 degree
-Running 3D billboard under XP and having the application window display on the left side of the primary display, no longer results in the 3D screen image staying on the left side when dragging the application to the right side of the display device
-A black screen image is no longer displayed when entering a full screen DOS prompt when using an ATI Radeon 9800 XT under Windows XP
-The Windows XP Professional x64 Edition operating system no longer prompts the user for confirmation of the un-install of ATI Parental Control when running the ATI un-attended un-install
-Entering standby mode under the Windows XP operating system no longer results in display corruption being noticed or the operating system failing to respond
-Display corruption when using the TV-Out composite setting has now been resolved for the ATI Radeon Xpress 200 series
-Video corruption is no longer noticed when playing a DVD under Windows XP MCE
-Live TV no longer appears choppy when using and ATI Radeon X300 and two ATI Theater 550 Pro tuner cards and outputting to PiP in PowerCinema
-Video jitter is no longer noticed when playing back video using overlay with DXVA
-The German language control panel text no longer appears truncated when using 96 DPI

Display Driver,
Control Panel,
GART Driver,
South Bridge driver

http://dlmdownloads.ati.com.edgesuite.net/drivers/5-9-igp_xp-2k_dd_cp_wdm_sb_gart_26409.exe

Display Driver,
Catalyst Control Center,
GART Driver,
South Bridge driver

http://dlmdownloads.ati.com.edgesuite.net/drivers/5-9-igp_xp-2k_dd_ccc_wdm_sb_gart_enu_26409.exe

ATi Catalyst v. 8.18 beta win 2k/xP

/http://www.station-drivers.com/telechargement/ati/ati%208.18beta%202kxp.exe

Firma ATI z nieznanych nam przyczyn ukryła w sterownikach Catalyst 5.9 nowy tryb wygładzania krawędzi Adaptive Anti-Aliasing. Nowa metoda umożliwia pozbycie się artefaktów w generowanym obrazie, gdy na obiekt nałożona została przezroczysta tekstura. Takich obiektów w grach jest cała masa, począwszy od siatek, traw czy liści. Jak do tej pory niewielkie elementy były pomijane i w efekcie obiekty typu drzewo czy siatka płotu nie miały tak ładnych, gładkich i smukłych krawędzi. Rezultaty działania nowej metody możesz zobaczyć na obrazku. Wygląda identycznie jak na GeForce 7? Zgadza się. Dlaczego ATI ukrywa tak przydatne bajery? Prawdopodobnie ma zamiar zaoferować je jedynie nabywcom nadchodzących kart opartych na R520 i pochodnych. Tymczasem AAA działa na wszystkich Radeonach. Wystarczy zainstalować najnowsze ATI Tray Tools lub modyfikowane sterowniki WARCATS.


XTreme-G WarCats 5.9 PRO for ATi

Changes in this version :
-Tweaks for more stable and higher framerates;
-Major performance improvement in 3D applications that support DirectX;
-Performance improvement in OGL applications;
-OpenGL tweaks for better image quality;
-Direct3D tweaks for better image quality ;
-DirectX tweaks;
-High image quality tweaks that reduce the loss of performance;
-Many texture tweaks for better image quality and performance;
-Support for a very large variety of textures;
-Support for different types of Z and W mask , fog and compression;
-System tweaks for better performance and stability (AGP , System Memory);
-Tweaks to squeeze more power out of your video card;
-Fast textures rendering;
-This driver features a new Technology called Adaptive Anti-Aliasing wich is
available also in the normal Catalyst driver but locked for unknown reasons.

ATI Catalyst v. 5.9 mobil win 2k/XP

/http://www.station-drivers.com/telechargement/ati/ati%20mobility%205-9%202kxp-whql.exe

ATI Catalyst Drivers for Windows 2000/XP 5.10a Beta

This unified driver has been further enhanced to provide the highest level of power, performance, and reliability. The ATI CATALYST software suite is the ultimate in performance and stability.

This download includes the Display Driver, Control Panel, CATALYST Control Center, and WDM Capture driver.


Latest Changes:

* This driver is intended only for Serious Sam II and Quake 4 has not been fully tested at this point for other applications

Radeon Omega Drivers 2.6.75a

http://down.9down.com/drivers/rad_w2kxp_omega_2675a.rar

ASUS Catalyst v. 8.183 win 2k/XP 32/64 bits


/ftp://ftp.asus.com.tw/pub/ASUS/vga/ATI/release%20driver/ati8183_w2kxp64.zip

ATI Radeon Omega Driver 2.6.83 Win 2K/XP

What's New in Omega Drivers v2.6.83:
- Based on the Catalyst 5.11 Official drivers.
- New, more advanced installer! Hope you like it.
- Added support for a few more 3rd party ATI cards.
- Individual tweaks for Standard and FireGL cards, that should solve the FireGL problems with OGL.

http://dlsrv1.winboard.org/treiber/rad_w2kxp_omega_2683_7z.exe

ATI Catalyst Mobil v. 5.13 win 2k/XP

/http://www.station-drivers.com/telechargement/ati/ati-catalyst-mobility-5-13-2kxp.exe


ATI Catalyst v. 5.13 win 2k/XP

/http://files2.guru3d.com/ati/5-13_xp-2k_dd_ccc_wdm_enu_29124.exe

ATI Catalyst 5.13 Mobil win 2k/XP WHQL

/http://www.station-drivers.com/telechargement/ati/ati-radeon-mobility-5.13-all-2kxp-whql.exe

Nowa linia sterownikow dla kart ATI - Catalyst 6.1

/https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/6-1_xp-2k_dd_ccc_wdm_enu_29602.exe

Radeon Omega Drivers 3.8.205

Pobierz :


/http://www.ngohq.com/home.php?page=Files&go=cat&dwn_cat_id=14

ATI Catalyst Mobil v. 6.1


/http://www2.ati.com/drivers/mobile/6-1-mobile_xp_dd_ccc_enu_29620.exe

ATI Catalyst 6.2 win XP/2k

/https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/6-2_xp-2k_dd_ccc_wdm_enu_30152.exe

ATI Catalyst Mobil v. 6.2


/http://www2.ati.com/drivers/mobile/6-2-mobile_xp_dd_ccc_enu_30156.exe

ASUS/ATI Catalyst v. 6.2 (8.223)


/ftp://ftp.asus.com.tw/pub/ASUS/vga/ATI/ati8223_w2kxp.zip

/ftp://ftp.asus.com.tw/pub/ASUS/vga/ATI/ati8223_wxp64.zip

Radeon Omega Driver 3.8.221
Size: 22.9Mb
Hits: 52775
Author: ATI & Omegadrive
Description: Catalyst 6.2 Software
Operation System: Windows XP/2000

/http://www.ngohq.com/home.php?page=Files&go=cat&dwn_cat_id=14&go=giveme&dwn_id=258

ATI Catalyst Mobility v. 6.3


/http://www.station-drivers.com/telechargement/ati/ati%20mobility-6.3-2kxp.exe

ATi Catalyst 6.4 win XP

/https://support.ati.com/ics/support/KBAnswer.asp?questionID=640

2 Użytkownik już powiedział Dziękuję!

Leonidas, bazylia

Ze strony ATi już można pobrać najnowszą wersje sterowników Catalyst. Naprawiono między innymi obługę CrossFire w grze Oblivion, usunięto błędy przy grze w Quake4, oraz sporadyczne przypadki zawieszania się systemu podczas instakacji kart Radeon X1x00 na płytach głównych z chipsetami nForce4. Całą listę poprawek można znaleźć w dokumencie Catalyst Release Note Version 6.7 na stronach ATi.

* ATi CATALYST 6.7

ATi CATALYST 6.8 CCC

Ze strony ATi już można pobrać najnowszą wersje sterowników Catalyst. Usunięto błędy przy grach 'Lord of the Rings: The Battle for Middle Earth' na kartach Radeon z serii X800; 'Prince of Persia: The Two Thrones' na kartach Radeon X19x0; 'QQ Fantasy' na Radeonach X1600 i X1300; 'Splinter Cell: Chaos Theory' z włączonym AA na serii X800, oraz wiele wiele innych.

Ale pozostało też wiele znanych błędów, które będą poprawione w kolejnej wersji sterowników, między innymi: Anarchy-Online, Battlefield 2, Cold War, Elder Scolls IV: Oblivion, Neverwinter Nights, Sniper Elite... Całą listę poprawek można znaleźć w dokumencie Catalyst Release Note Version 6.8 na stronach ATi.

ATi CATALYST 6.8

ATI Radeon Mobility v. 6.9


/http://www2.ati.com/drivers/mobile/6-9-mobile_xp_dd_ccc_enu_35779.exe